Printing; Setting; Description - Canon B115 User Manual

REPORT SETTINGS
Name
TX REPORT
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX/RX SEPARATE
TX SETTINGS
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL

Description

Enable/disable automatic printing of the transmission report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every time you send a
document.
PRINT ERROR ONLY: Print only when an error occurs during sending.
Enable/disable automatic printing of the reception report.
OUTPUT NO: Turn off the activity report feature.
OUTPUT YES: Set the fax to print an activity report every time you receive
a document.
PRINT ERROR ONLY: Print only when an error occurs during receiving.
Enable/disable automatic printing of the activity report.
When you set ON, your fax is set to print an activity report for every 20
transactions (sending and receiving).
Divide the activity management report into sending and receiving
transactions.
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling sequence.
Determine whether the fax will redial a number if it fails to get a response
on the first attempt.
Set the number of retries.
Set the period of time between redialling attempts.
Selecting a menu
Settings
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY
OUTPUT NO/
OUTPUT YES/
PRINT ERROR ONLY/
-
OUTPUT NO/
OUTPUT YES
ON/OFF
Settings
ON/OFF
4 seconds (1 to 15)
ON/OFF
2 times (1 to 10)
2 minutes (2 to 99)
8-3
8