Activity Report; One-Touch Speed Dialling List; Coded Speed Dialling List; User's Data List - Canon B115 User Manual

Activity report______________________________

Summarises the information for the sending and receiving activities of your fax after 20 transactions. For
automatic printing, see ACTIVITY REPORT, p. 8-3.
Transactions in an activity report are listed chronologically.

One-touch speed dialling list __________________

Lists the numbers and names registered under one-touch speed dialling buttons.

Coded speed dialling list _____________________

Lists the numbers and names registered under coded speed dialling codes.

User's data list_____________________________

Lists the current settings of the fax and the registered sender information.

Doc. memory list ___________________________

Lists the documents currently stored in the fax's memory (see p. 5-14).

TX (Transmission) report_____________________

You can set the fax to print an activity report every time you send a document. See TX REPORT, p. 8-3.

RX (Reception) report _______________________

Normally the fax does not print an activity report for receiving, but you can set the fax to print an activity
report every time you receive a document. See RX REPORT, p. 8-3.
You can set the fax to print an activity report only when an error occurs during receiving. See RX REPORT,
p. 8-3.
Multi TX/RX (Transaction) report ______________
Lists the result of a sequential broadcasting.
If you set the fax to print activity reports (TX REPORT or RX REPORT) and then use sequential
broadcasting, a MULTI TX/RX REPORT will be printed instead of a TX (Transmission) REPORT. See TX
REPORT, p. 8-3.
A memory clear report is printed automatically when power is restored after a power failure. See Memory
clear report, p. 9-19.
Note
8-8