Mercedes-Benz R-Class Owner's Manual page 87

Controls
Seats
Outer seat head restraints in the 2nd row of seats
Release catch
1
To remove: pull the head restraint up to
X
the stop.
Press release catch 1 and pull the head
X
restraint out of the guides.
To refit: place the head restraint in the
X
guides of the backrest.
i
For the head restraints on the outer seats
in the 2nd row of seats, the notches on the
guide rod must be on the left-hand side
when viewed in the direction of travel.
Push the head restraint down until you hear
X
it click into place.
84
Easy-entry/exit feature for the 3rd
row of seats
G Risk of injury
Once passengers have got into or out of the
vehicle, make sure that:
the outer seats in the 2nd row are locked
R
in position
the outer seat backrests in the 2nd row
R
of seats are upright and locked in posi-
tion
The outer seats in the 2nd row are only
locked if the lock verification indicator is
folded in and the indicator area is barely
visible.
If the backrests are not locked in position:
Sharp braking
R
A sudden change of direction
R
An accident
R
could cause the backrests to fold forwards
and not provide the intended level of
restraint, thereby resulting in additional
serious or even fatal injury.
Easy-entry feature
The release lever for the easy-entry feature is
located on the entry side on the back of each
outer seat in the 2nd row of seats.
Release lever for the easy-entry feature
1
Pull release lever 1 in the direction of the
X
arrow to the pressure point and hold it in
this position.
The backrest folds forwards.
Slide the seat in the 2nd row of seats for-
X
wards to the stop.