Mercedes-Benz R-Class Owner's Manual page 132

i
Menu overview: ( page 123).
Y
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
Press the è or · button repeatedly
X
until either the original menu or the Mes-
sage memory menu appears.
If the Message memory menu does not
appear, there are no display messages.
If there are messages, the following mes-
sage may appear in the multi-function dis-
play, for example: 2 messages.
Use the j or k button to scroll
X
through the display messages.
Settings menu
In the Settings menu, you can use the To
reset: Press reset button for 3 sec-
onds function to restore most settings to the
factory settings. And there are submenus via
which you can make individual settings for
your vehicle.
i
Menu overview: ( page 123).
Y
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle submenu. The Headlamp mode
function in the Lighting submenu is only
reset if the vehicle is stationary.
Press the è or · button to select the
X
Settings menu.
Press and hold reset button
X
instrument cluster for approximately three
seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
Press reset button J again.
X
The functions of most submenus are
restored to the factory settings.
or
If you want to retain the settings, do not
X
press reset button J a second time.
You will see the Settings menu again after
approximately 5 seconds.
Press the è or · button to select a
X
different menu.
Submenus in the Settings menu
Press è
X
tings menu.
Press the j
X
tion of submenus.
A list of submenus is displayed. More sub-
menus are available than can be displayed
at a time.
J on the
Press the æ
X
submenu.
The selected submenu is highlighted.
Press the j
X
within a submenu.
Press the æ
X
the setting.
The changed setting is stored.
Press the è
X
different display.
The following tables show the settings you
can make in the individual submenus. You will
Controls
On-board computer
or · to select the Set-
button to call up the selec-
or ç button to select a
button to select a function
or ç button to change
or ÿ button to select a
129
Z