Mercedes-Benz R-Class Owner's Manual page 136

Press the æ or ç button to switch
X
the Surround lighting function on or
off.
Press the j, è or ÿ
X
select a different display.
Activating or deactivating the exterior
lighting delayed switch-off
Using the Headlamp switch-off delay
function, you can set whether the exterior
lighting should remain on for 15 seconds after
the doors are closed when it is dark. If none
of the doors are opened after the engine is
switched off or if an open door is not closed,
the exterior lighting goes out after 60 sec-
onds.
When you have set a delayed switch-off time
and then switch off the engine, the following
remain lit:
the position lamps
R
the tail lamps
R
the licence plate lighting
R
the front foglamps
R
Press è or
X
tings menu.
Press the j
X
button to
tion of submenus.
Press æ or
X
ing submenu.
Press the j
X
delayed switch-off.
Press the æ
X
or deactivate the Headlamps delayed
switch-off function.
Press the j,
X
select a different display.
To temporarily deactivate the delayed switch-
off:
Before leaving the vehicle, turn the key to
X
position 0 in the ignition lock.
Turn the key to position 2 in the ignition
X
lock and back to position 0.
Delayed switch-off is deactivated.
Delayed switch-off is reactivated as soon as
you restart the engine.
Activating/deactivating the interior
lighting delayed switch-off
Using the Interior lighting delayed
switch-off function, you can set whether
· to select the Set-
button to call up the selec-
ç to select the Light-
button to select Headlamps
or ç button to activate
è or ÿ button to
On-board computer
the interior lighting should remain on for 10
seconds after the key is removed from the
ignition lock when it is dark.
Press è or · to select the Set-
X
tings menu.
Press the j button to call up the selec-
X
tion of submenus.
Press the æ or ç button to select the
X
Lighting submenu.
Press the j button to select Interior
X
lighting delayed switch-off.
Press the æ or ç button to activate
X
or deactivate Interior lighting
delayed switch-off.
Press the j, è or ÿ
X
select a different display.
Setting the display when the ignition is
switched off
The Display when ignition off function
allows you to set which display you see in the
multi-function display after the key is
removed from the ignition lock.
Press è or · to select the Set-
X
tings menu.
Press the j button to call up the selec-
X
tion of submenus.
Controls
button to
Z
133