Mercedes-Benz R-Class Owner's Manual page 256

location of the jack and of the other tools
may differ from those illustrated.
Example
Tool holder
1
Wheel wrench
2
Electric air pump
3
Instructions on the installation position of
4
the tool holder
Fuse allocation chart
5
Jack, ratchet ring spanner
6
Centring pin
7
8 Folding wheel chock
Towing eye
9
Wheel bolts
a
b
Ball coupling of the trailer tow hitch*
c Emergency spare wheel*
* optional
Removing the emergency spare wheel*
Remove the jack from the tool holder
X
( page 252).
Y
Retaining screw
1
2 Emergency spare wheel*
Tool holder
3
Turn retaining screw 1 anticlockwise and
X
out of tool holder 3 and remove it.
i
If retaining screw 1 does not come out
immediately, turn tool holder
wise a little.
Retaining screw 1 should then unscrew
with ease.
Turn tool holder
X
that the electrical air pump points back-
wards ( page 252).
Y
Remove tool holder
X
spare wheel* 2.
Remove emergency spare wheel*
X
the emergency spare wheel well.
Stowing the emergency spare wheel*
Remove the warning triangle from the
X
emergency spare wheel well (
3 anticlock-
Guides
1
In the spare wheel well, there are two guides
1 to keep the emergency spare wheel* in
place.
Practical advice
Where will I find...?
3 approximately 180°, so
3 from emergency
2 from
page 250).
Y
253
Z