Controls
Loading and stowing
tion suddenly or are involved in an accident,
and could cause you an injury.
You can use the safety net in two different
positions:
Bracket behind the B-pillar
1
Bracket behind the C-pillar
2
The brackets behind B-pillar
R
required for the full luggage compartment
enlargement (
page 191).
Y
The corresponding lashing eyelets
to tighten the net are located in the footwell
of the 2nd row of seats (
page 188).
Y
The brackets behind C-pillar
R
required for the partial luggage compart-
ment enlargement (
page 190).
Y
200
The corresponding lashing eyelets to ten-
sion the net are located in the luggage
compartment (
Preparing the safety net
Open the two Velcro fasteners on the
X
safety net holder.
Unroll and unfold the safety net.
X
The upper and lower guide rods must
engage audibly.
Attaching the safety net
1
are
Guide rod inserted behind B-pillar
Retainer
1
Guide rod
2
2
are
page 188).
Y
Insert guide rod
2
into retainer
X
direction of the arrow.
Slide guide rod
2
forwards into retainer
X
1
in the direction of the arrow.
Tightening the safety net
Seat belt reel holder behind the front seats
Belt hook
1
Lashing eyelet
2
Strap
3
Insert belt hook
1
into lashing eyelet
X
in the direction of the arrow.
Pull tensioning strap
3
by the loose end in
X
the direction of the arrow until the safety
net is tight.
After a short distance, check the tension of
X
the safety net and retighten it if necessary.
1
in the
2