Mercedes-Benz R-Class Owner's Manual page 141

Controls
On-board computer
Resetting the consumption statistics
Using è or ·, select From start.
X
Press the j or k button to select the
X
function that you wish to reset.
Press and hold the reset button on the left
X
of the instrument cluster until the values
are reset to "0".
The From reset consumption statistics are
reset automatically after 9,999 hours or
99,999 kilometres.
Calling up the range
Using è or ·, select From start.
X
Press the j or k button to select
X
Range:
The multi-function display shows the esti-
mated distance that can be covered by the
vehicle, based on your current driving style
and the amount of fuel remaining in the
tank.
If there is only a small amount of fuel left in
the fuel tank, the display shows a vehicle
being refuelled ¿ instead of the range.
138
Telephone menu
Functions and displays depend on the
optional equipment installed in your vehicle.
You can place your mobile phone in the
mobile phone bracket* ( page 208), or set
Y
up a Bluetooth connection to the audio sys-
tem or COMAND APS* (see separate operat-
ing instructions).
G Risk of accident
Observe the legal requirements of the
country in which you are currently driving
regarding the use of mobile phones in the
vehicle.
If it is permitted to use mobile phones while
the vehicle is in motion, you should only use
them when the road and traffic conditions
allow. You may otherwise be distracted
from the traffic conditions, cause an acci-
dent and injure yourself and others.
i
Menu overview:( page 123).
Y
Use the buttons on the multi-function steer-
ing wheel.
Switch on the mobile phone and audio sys-
X
tem or COMAND APS*; see separate oper-
ating instructions.
Press the è or · button to select the
X
Telephone menu.
Mobile phone on
PIN code not yet entered
Once you have inserted the mobile phone into
the mobile phone cradle*, the multi-function
display shows the message Please enter
PIN.
Enter the PIN using the mobile phone, Lin-
X
guatronic*, the audio system or COMAND
APS*.
The mobile phone will search for a network.
Mobile phone operational
The multi-function display shows the mes-
sage Ready or the name of the GSM network
provider. If the operational readiness symbol
goes out, your vehicle is outside the trans-
mission and reception range. In this case, the
message No service appears in the multi-
function display.
* optional