Mercedes-Benz R-Class Owner's Manual page 312

Replacing the bulbs in foglamps with
cornering light function*
Front foglamp
1
Cover
2
Cover screws
3
Foglamp screws
4
Switch off the lights.
X
Remove screws 3.
X
Remove cover 2.
X
Remove screws 4.
X
Remove front foglamp 1 from the bumper.
X
* optional
Bulb holder for front foglamp
5
i
If necessary, reconnect the additional
cable during installation.
Turn bulb holder 5 anti-clockwise and pull
X
it out.
Pull the bulb out of bulb holder 5.
X
Insert the new bulb into bulb holder 5.
X
Insert bulb holder 5 and turn clockwise
X
until it engages.
Insert front foglamp 1 into the bumper.
X
Replace screws 4 of front foglamp 1.
X
Position cover 2.
X
Fasten screws 3 into cover 2.
X
Practical advice
Changing the bulbs
Replacing the turn signal lamps
Bulb holder for turn signal
1
Switch off the lights.
X
Open the bonnet.
X
Turn bulb holder 1 anti-clockwise and pull
X
it out.
Turn the bulb anti-clockwise, applying
X
slight pressure, and remove it from bulb
holder 1.
Insert the new bulb into bulb holder
X
turn clockwise while applying slight pres-
sure.
Insert bulb holder 1 and turn clockwise
X
until it engages.
1 and
Z
309