Mercedes-Benz R-Class Owner's Manual page 122

Activating the multi-function display
Switch on the ignition.
X
To dim the instrument cluster lighting
1
Reset button
2
To brighten the instrument cluster lighting
3
The multi-function display is also activated
when you:
switch on the lights
R
press reset button 2
R
open a front door
R
* optional
Adjusting the instrument cluster
lighting
Brighter: press and hold down button 3.
X
Dimmer: press and hold down button 1.
X
Resetting the trip meter
Select the standard display menu
X
( page 125).
Y
Press and hold reset button 2
X
meter is reset.
Clock
On vehicles with Audio 20, you can set the
time using the on-board computer
( page 131).
Y
Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
Distronic* mode:
One or two segments around the stored
speed light up.
Rev counter
The red band in the rev counter indicates the
until the trip
engine's overrevving range. The fuel supply is
interrupted to protect the engine when the
red band is reached.
!
Do not drive in the overrevving range.
Doing so will damage the engine.
H Environmental note
Avoid driving at high engine speeds, as this
increases your vehicle's consumption
unnecessarily and pollutes the environ-
ment through increased emissions.
Controls
Instrument cluster
Z
119