Table of Contents
Advertisement
F-100 Super Sabre
Assembly & Operation Manual
EQUIPMENT BOARD LAYOUT
Originally we used a 12 ch RX with a X-plus. Later we switched to a 20ch RX. Here in this
photo you can see the Cortex Pro Gyro system mounted.
The Inlet Extension is removed in this picture. You will not be able to see this once it is in
place.
The demo model uses Electric Gear. We used the gear sequencer in the IX20 to close the
main doors when the plane is on the ground. The stock Gear sequencer will only leave the
doors open when the gear is down. We left the nose door plugged into the stock unit as it
cannot close on the ground. The nose steering servo sits in the opening where the door
would have to close.
BVM ® 2021
10
07/2021
Advertisement
Table of Contents
Need help?
Do you have a question about the GO FLY GOLD F-100 SUPER SABRE and is the answer not in the manual?
Questions and answers