Table of Contents
Advertisement
Manual
CRUMBLING ROLLER DV 400C/4000-8000 NS
C. MACHINE HANDLING USING LIFTING EQUIPMENT
(1)
C.1
The lifting equipment and tying means designed for handling of the machine must have their load capacity
at least identical with the weight of the handled machine.
(2)
C.2
Machine fastening for handling may only be performed in places designed for that and marked with self-
adhesive labels showing the "chain" symbol.
(3)
C.3
After fastening (suspending) at designated points, it is forbidden to move in the space of possible reach of
the handled machine.
D. WORK SAFETY LABELS
Warning safety labels serve for operator protection.
General:
A) Strictly observe the warning safety labels.
B) All safety instructions also apply to other users.
C) Upon damage or destruction of the aforementioned "SAFETY LABEL" located on the machine, THE
OPERATOR IS OBLIGED TO REPLACE IT WITH A NEW ONE!!!
The position, appearance, and precise meaning of work safety labels on the machine is determined in the following
table (Tab. 3) and in the figure (Fig. 1, 2).
Table 3 – Self-adhesive warning safety labels located on the machine
WARNING SAFETY LABEL
LABEL TEXT
Read the Operating manual carefully
before operation.
When operating the machine, observe
all the related safety instructions and
regulations.
Do not step between the tractor and
the machine when coupling or
uncoupling.
Do not step between the tractor and
the machine until they are at rest and
the engine turned off.
Keep away of the reach of the lifted
machine.
Keep away from the reach of the
tractor + machine if the tractor engine
is running or the set moving.
Before uncoupling the machine from
the tractor, it should be supported
with the telescopic foot so that it
cannot fall down.
Secure the lateral frames with the
connecting rod against undesirable
unfolding before transporting the
machine.
7 │ 25
MACHINE POSITION
P 1 H
P 2 H
P 4 H
P 6 H
P 10 H
P 13 H
Advertisement
Table of Contents
