Table of Contents
Advertisement
Manual
CRUMBLING ROLLER DV 400C/4000-8000 NS
(9)
It must be demonstrably familiarised with the safety regulations for work with the machine and must
practically master the machine operation,
(10)
The machine may not be operated by juveniles.
(11)
It must know the meaning of the safety signs located on the machine. Their respecting is important for
safe and reliable machine operation.
(12)
A.4
Maintenance and servicing repairs on the machine may only be performed by a person:
(13)
Authorised by the operator,
(14)
Educated in the machinery field with knowledge of repairs of similar machines,
(15)
Demonstrably familiarised with safety regulations for work with the machine,
(16)
During a repair of a machine connected to a tractor, it must own a driver's licence of the corresponding
category.
(17)
A.5
Machine operator must secure the safety of other persons when working with the machine or transporting
the machine.
(18)
A.6
During machine work in the field or during transport, the operator must control the machine from the
tractor's cabin.
(19)
A.7
The operator may enter the machine structure only with the machine at rest and blocked against movement,
namely only for these reasons:
(20)
Adjustment of the machine working parts,
(25)
Unlocking the connecting rod before unfolding the lateral frames.
(xxx)
A.8
When stepping on the machine, do not step on roller tyres or other rotary parts. Those may turn and you
can cause very serious injuries by the subsequent fall.
(22)
A.9
Any changes or modifications of machine may be performed only with written consent of the
manufacturer. For possible damage arisen due to ignoring this instruction, the producer bears no
responsibility. The machine must be maintained equipped with prescribed accessories and equipment
including safety marking. All warning and safety signs must be legible and in their places. In case of damage
or loss, these signs must be immediately renewed.
(23)
A.10
The operator must have the Operating Manual with the work safety requirements available at any time
when working with the machine.
(24)
A.11
The operator must not consume alcohol, medicines, narcotic and hallucinogenic substances that decrease
his attention and coordination capabilities while using the machine. If the operator must use medicines
prescribed by a physician or uses freely sold medicines, he must be informed by a physician, whether he is
capable of responsible and safe operation of the machine under these circumstances.
Protective Tools
For the operation and maintenance use:
Tight clothes
Protective gloves and goggles for protection against dust and sharp parts
of the machine
B. MACHINE TRANSPORT USING TRANSPORT MEANS
(1)
B.1
The transport means designed for machine transport must have the load capacity minimally identical with
the weight of the transported machine. The total weight of the machine is stated on the production label.
(2)
B.2
The dimensions of the transported machine including the transport means must comply with the valid
regulations for road traffic (decrees, laws).
(3)
B.3
The transported machine must be always fastened to the transport means so that its spontaneous loosening
could not happen.
(4)
B.4
The carrier is responsible for damage caused by the loosening of incorrectly or insufficiently fastened
machine to the transport means.
6 │ 25
Advertisement
Table of Contents
