Manual
CRUMBLING ROLLER DV 400C/4000-8000 NS
Fig 13 - Roller bearings
*
Lubricant handling:
Protect yourselves against direct contact with oils by using gloves or protective creams.
Thoroughly wash oil spots on the skin using warm water and soap. Do not clean the skin with petrol, engine
diesel fuel or other solvents.
Oil is poisonous. If you swallowed the oil, immediately seek a physician.
Protect the lubricants against children.
9. ENVIRONMENTAL PROTECTION
Check tightness of the hydraulic system regularly.
All the hydraulic hoses and the other parts of the hydraulic system showing signs of damage should be replaced
or repaired.
Remember that the service life of the hydraulic hoses includes their storage time before they were used.
Dispose the used lubricants according to the related regulations.
10. MACHINE DISPOSAL AFTER SERVICE LIFE EXPIRY
The operator must secure during machine disposal that steel parts and parts, in which hydraulic oil or lubricating
grease moves are differentiated.
Steel parts must be cut by the operator while observing safety regulations and handed over to the secondary raw
material collection point. He must proceed with other parts according to valid laws about waste.
Fig. 14 – Pins (journals)
17 │ 25