Table of Contents
Advertisement
Manual
CRUMBLING ROLLER DV 400C/4000-8000 NS
Remove stuck soil from folding points, soil may impair function and cause damage to the mechanics.
During folding or unfolding, check the side frames and have them continuously fold into the end position.
Before unlocking the connection rod, the operator(s) must secure the set against undesirable motion
and check (from the tractor cab) by using the hydraulic system control levers whether or not there is oil
in the piston rods. Only after the operator is sure that there is oil in the piston rod, may he proceed to
unlocking the connection rod.
Procedure for lowering the machine:
o
Lift the machine on the suspender of the tractor.
o
Lower the side frameworks smoothly.
o
Block or close the controlling unit.
o
Fix the connecting rod (fig. 6) securing the side frames.
Procedure for unfolding the machine:
o
Remove the connecting rod (fig. 6)
o
Lift the machine on the suspender of the tractor.
o
Unfold the side frameworks smoothly.
o
Block or close the controlling unit.
Fig. 6 – Connecting Rod
4. MACHINE TRANSPORT ON ROADS
Transport Position of the machine:
o
The machine side frames must be tilted down to transport position.
o
The machine side frames must be secured by means of the connecting rod (fig. 6).
o
Connect the machine by linking to the tractor by means of three-point suspension.
o
The machine must be equipped with shields with marking of contours, functional lighting, and the
triangle of the rear marking for slow vehicles (according to ECE No. 69).
o
The lighting must be activated during travelling on roads.
o
The tractor must be equipped with a special light device of an orange colour, which must be activated
during travelling on roads.
o
The maximum transport speed during travelling on roads is 20 kph.
o
Secure the lower shoulders of the tractor TPS from side swing.
o
After coupling the machine to the tractor, slide in the supporting foot into POSITION 2 and secure it
by the pin and the cotter pin (Fig.10).
o
Before uncoupling the machine from the tractor in the transport position, secure the machine against
undesirable unfolding by the connecting rod (Fig.6). Then slide out the telescopic foot into POSITION
1 and secure it with the pin and the cotter pin (Fig.10).
Ban of transport with decreased visibility!
13 │ 25
Advertisement
Table of Contents
