Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Farmet DISKOMAT 3
Summary of Contents for Farmet DISKOMAT 3
- Page 1 OPERATING MANUAL DISKOMAT 3 DISKOMAT 3,5 Edition: 1 | effective from: 1. 2. 2013 IČ: Farmet a. s. telefon: +420 491 450 111 46504931 web: www.farmet.cz Jiřinková 276 DIČ: CZ46504931 fax: +420 491 450 136 e-mail: farmet@farmet.cz 552 03 Česká Skalice, CZ...
- Page 2 SOFTER Carried discs plough-harrow are quality products of Farmet a.s. Ceska Skalice. You can fully utilise the advantages of your machine after thoroughly studying the operating manual. The serial number of the machine is punched on the production label and written in the operating manual (see Table 1).
-
Page 3: Table Of Contents
Manual DISKOMAT 3 | 3,5 TABLE OF CONTEINS MACHINE LIMIT PARAMETERS ..................4 Technical parameters ......................4 Safety statement ........................4 A. GENERAL INSTRUCTIONS FOR USE ................5 Protective tools ........................5 B. MACHINE TRANSPORT USING TRANSPORT MEANS ..........6 C. -
Page 4: Table Of Conteins Machine Limit Parameters
Manual DISKOMAT 3 | 3,5 MACHINE LIMIT PARAMETERS The machine is designed for soil ploughing up to a depth of 18 cm when agricultural soil cultivation. Another type of use exceeding the determined purpose is considered as disallowed. Machine operation is performed by the tractor operator. -
Page 5: General Instructions For Use
Manual DISKOMAT 3 | 3,5 GENERAL INSTRUCTIONS FOR USE The machine is made in accordance with the latest equipment state and approved safety regulations. However, dangers of user or third person injury or machine damage or creation of other material damage may arise during use. -
Page 6: Machine Transport Using Transport Means
Manual DISKOMAT 3 | 3,5 MACHINE TRANSPORT USING TRANSPORT MEANS The transport means designed for machine transport must have the load capacity minimally identical with the weight of the transported machine. The total weight of the machine is stated on the production label. - Page 7 Manual DISKOMAT 3 | 3,5 Stay outside the reach of the tractor - P 6 H agricultural machine set, if the tractor engine is in operation. When folding the side frames, do not reach into the space of the machine P 20 H folding joints.
- Page 8 Manual DISKOMAT 3 | 3,5 Fig. 1 - Location of safety labels on the DISKOMAT machine P13H P37H P50H P37H P100H P13H P37H P50H P37H P53H P37H P53H 8 │ 19...
-
Page 9: Description
DISKOMAT 3 | 3,5 1. DESCRIPTION The DISKOMAT 3, DISKOMAT 3,5 machines are designed as carried with a three-point linkage of category TBZ 3. Diskomat consists of a frame that carries two rows of working discs with a diameter of 620 mm with automatic spring protection. There are deflectors directing and breaking flying soil located behind the front as well as the rear row of discs. -
Page 10: Agregation To A Tractor
Manual DISKOMAT 3 | 3,5 Aggregation of the machine with the tractor is to be performed on a flat and hardened surface. When working on slopes, observe the lowest slope grade of the set TRACTOR - MACHINE. ... -
Page 11: Machine Transport On Roads
Manual DISKOMAT 3 | 3,5 4. MACHINE TRANSPORT ON ROADS Connect the machine by suspending on the tractor using the three-point suspension equipment (TPS 3). Fold the side discs on the main frame into the transport position. Fold and unfold discs using the control lever (see the figure). When controlling the position of the disc, never stand under the disc –... - Page 12 Manual DISKOMAT 3 | 3,5 Turn over the rear twin roller and secure it with the stopper - only if the machine is equipped with the rear twin roller. The machine must be equipped with removable shields with marking of contours, functional lighting, and the board of the rear marking for slow vehicles (according to ECE No.
-
Page 13: Machine Adjustment
Manual DISKOMAT 3 | 3,5 5. MACHINE ADJUSTMENT Fig. 3 – Machine adjustment 5.3 - Setting the side deflector 2 - seřízení podélné 5.2 - Setting the lengthwise level roviny stroje 5.4 – Roller fixture 5.1 - Setting the working depth Rear roller Disky –... -
Page 14: Setting The Side Deflector
Manual DISKOMAT 3 | 3,5 The machine features high stability during operation. However turning of machine to one side may occur with fault adjusted longitudinal plane (particularly in heavy soils). This is removed by modification of tractor arm height as follows: When turning the machine to the left, the front discs are set lower =>... -
Page 15: Machine Maintenance And Repairs
Manual DISKOMAT 3 | 3,5 6. MACHINE MAINTENANCE AND REPAIRS Observe the safety instructions for treatment and maintenance. If it is necessary to weld during the repair and have the machine connected to the tractor, it must have disconnected supply cables from the alternator and the accumulator. -
Page 16: Machine Storage
Manual DISKOMAT 3 | 3,5 7. MACHINE STORAGE Long-term machine shutdown: Store the machine under a roof if possible. Store the machine on a flat and solid surface with sufficient load capacity. Clean the machine before storing and conserve so that it is not damaged in any way during storage. Pay special attention to all marked lubrication points and properly lubricate them according to the lubrication plan. -
Page 17: Environmental Protection
This provision does not apply to the replacement of wearable spare parts (see point 11.2.3). 11.2.8 The warranty is conditioned by using the genuine spare parts of the manufacturer. Prepared by: Technical Department, Farmet a.s., Jirinkova 276, Ceska Skalice 552 03, On 7 February 2012, changes reserved 17 │ 19... -
Page 18: Letter Of Guarantee
The warranty is bound to the machine and is not void upon an owner change. The warranty is limited to the disassembly and assembly, possibly replacement or repair of the defective part. The decision, whether to replace or repair the defective part, is up to the contractual workshop of Farmet. VII. -
Page 19: Ce Certificate Of Conformity
Сельскохозяйственная машина: - наименование Дисковый лущильник Urządzenie maszynowe: Talerzowy pług podorywkowy - nazwa - typ, type DISKOMAT - model, modèle DISKOMAT 3; 3,5 výrobní číslo : serial number Fabriknummer n° de production заводской номер numer produkcyjny: Příslušná nařízení vlády: č.176/2008 Sb. (směrnice 2006/42/ES).
Need help?
Do you have a question about the DISKOMAT 3 and is the answer not in the manual?
Questions and answers