Adjustment Procedure References
This section provides supplemental information for the adjustment which is performed by the
program. Connection instructions and some additional explanations are provided. Use this
chapter as a reference when performing the adjustment.
Resistance Measurement Adjustment
This adjustment updates the data to adjust the measurement resistance to the standard values.
Equipment
Setup
This setup obtains the range resistor adjustment data and the process amplier attenuator
adjustment data.
Perform the following steps as the program instructs.
1. Connect the specied termination or standard resistor directly to the 4338B UNKNOWN
Connectors.
2. Repeat step 1 as instructed.
Standard Resistors
Open Termination
Short Termination
42030A
42090A
42091A
Adjustment
2-5