22: Camera Control - Roland V-160HD Reference Manual

22: CAMERA CONTROL

Menu item Value
CAMERA
CAMERA ID
N/A, JVC, Panasonic,
PROTOCOL Canon PTZ, VISCA over IP,
PTZOptics, Avonic
IP ADDRESS 192 .168 .0 .101
LOGIN NAME ENTER
PASSWORD
ENTER
CAMERA PRESET RECALL PRESET
Specifies how presets are recalled.
ALL CAMERAS RECALL OFF
ON
PRESET
CAMERA PRESET STORE
Adjusts the horizontal position of the camera. When the cursor is located at this value, you can control the camera.
PAN LEFT
RIGHT
Adjusts the vertical position of the camera. When the cursor is located at this value, you can control the camera.
TILT
DOWN
UP
SPEED 1–12–24
Adjusts the camera's zoom position. When the cursor is located at this value, you can control the camera.
WIDE (FAST)
ZOOM WIDE (SLOW)
TELE (SLOW)
TELE (FAST)
Adjusts the focal point of the camera. When the cursor is located at this value, you can control the camera.
FOCUS (*18) NEAR
FAR
AUTO FOCUS
OFF,
EXPOSURE MANUAL, AUTO
TALLY CH HDMI
(*18) This can be set if "AUTO FOCUS" is "OFF. "
Explanation
(bold text: default value)
1–16
Selects the camera to be controlled.
Specifies the camera's protocol.
Input the camera's IP address.
Displays the LOGIN NAME screen.
Enter the log-in name needed to connect with the camera when "PROTOCOL" is "JVC. "
Displays the PASSWORD screen.
Enter the password needed to connect with the camera when "PROTOCOL" is "JVC. "
Selects a preset in which camera settings are preset. By pressing the [VALUE] knob you can recall
a preset from the camera.
1–10
By assigning a USER button to the camera control function, you can recall presets using the
buttons (p. 67).
Recall presets from the camera that is being controlled.
Simultaneously recall presets from all cameras (CAMERA 1–16).
This selects the preset in which camera settings will be registered. By pressing the [VALUE] knob
1–10 you can register the camera settings to a preset.
* Presets are saved in the camera itself.
While you hold down the [VALUE] knob, the camera faces left.
While you hold down the [VALUE] knob, the camera faces right.
While you hold down the [VALUE] knob, the camera faces up.
While you hold down the [VALUE] knob, the camera faces down.
Adjusts the speed at which the camera changes direction.
While you hold down the [VALUE] knob, the camera zooms-out at high speed.
While you hold down the [VALUE] knob, the camera zooms-out at low speed.
While you hold down the [VALUE] knob, the camera zooms-in at low speed.
While you hold down the [VALUE] knob, the camera zooms-in at high speed.
While you hold down the [VALUE] knob, the focus moves closer.
While you hold down the [VALUE] knob, the focal point moves farther away.
ON
When this is "ON, " the focal point is set automatically.
Specifies the exposure mode.
Specifies the connector from which the camera video is input. When the camera video from the
1–8, SDI 1–8
V-160HD is the final output, the camera's tally light is lit.
Menu List
99