Making The Sequencer Run Automatically (Auto Sequence) - Roland V-160HD Reference Manual

Other Functions

Making the Sequencer Run Automatically (Auto Sequence)

Use the auto sequence feature when you want to make the functions recorded in the sequencer execute automatically.
Configuring the auto sequence settings
Set the action or function that's executed when the sequencer
advances to the next function. You can add some delay time before
the next function is executed, or pause the execution of a function.
Ó
1 .
[MENU] button "SEQUENCER"
press the [VALUE] knob.
The list of operations recorded in the sequencer is shown.
2.
Select the function in the list, and press the [VALUE] knob.
The FUNCTION EDIT menu appears.
3 .
Use the [VALUE] knob to select "AUTO SEQUENCE," and
press the [VALUE] knob.
4 .
Use the [VALUE] knob to set the action that's executed
when the sequencer advances to the next function, and
then press the [VALUE] knob.
Value Explanation
PAUSE
Pauses the auto sequence.
AUTO
Executes the next operation in the sequence.
Executes the next operation after delaying for a specified
1–120sec
amount of time.
5 .
Press the [MENU] button to close the menu.
60
Ó
select "LIST EDIT," and
Running the auto sequence
1 .
Long-press the SEQUENCER [ON] button to turn the
sequencer function on (the button lights up).
The list of operations recorded in the sequencer is shown.
Long-press
Check which action is executed when the sequencer
moves to the next function. When this is set to "PAUSE, "
this is blank.
2 .
Press the [AUTO SEQUENCE] button to turn the auto
sequence function on (the button lights up).
The functions in the list are executed, starting at the beginning.
The [NEXT] button blinks while a function is executing.
When the last function is finished, the sequence stops
automatically.
When a function is set to "PAUSE"
When the function is finished, the [AUTO SEQUENCE] button blinks
and auto sequence is paused. You can press the [NEXT] button to
manually execute the next function.
* When executing a function that's set to a value other than "PAUSE, "
the auto sequence is resumed.
3 .
Press the [AUTO SEQUENCE] button again to turn off the
auto sequence.
4 .
Long-press the SEQUENCER [ON] button again to turn the
sequencer function off.
MEMO
You can repeatedly execute functions that are in a list. When the
last function is finished, the sequencer returns to the beginning.
Ó
Use the [MENU] button
EXECUTE" to "ON. "
Ó
"SEQUENCER" and set "REPEAT