Capturing A Still Image From Input/Output Video; Deleting A Still Image - Roland V-160HD Reference Manual

Capturing a Still Image from Input/Output Video

Here's how to capture a still image from the input/output video.
1 .
Press the [CAPTURE IMAGE] button to turn on (lit).
CAPTURE IMAGE screen appears, and the cross-point [1]–[8]
buttons blink yellow.
2 .
Press a PGM/A or PST/B cross-point [1]–[8] button to select
a save destination memory (STILL 1–16) for the captured
still image.
ÁButton assignments
PGM/A cross-point [1]–[8]
PST/B cross-point [1]–[8]
* If you decide to cancel, press the [EXIT] button.
3 .
Press a button that is blinking red to select the input/
output video from which you want to capture.
ÁButton assignments
PGM/A cross-point [1]–[8]
PST/B cross-point [1]–[8]
[CUT]
[AUTO]
PGM/A cross-point [10]
The capture is executed. When the operation is finished, the
message "COMPLETE" appears.
4 .
Press the [CAPTURE IMAGE] button to exit the operation.
MEMO
¹ You can set the method of saving still images to "temporarily
save. " When you turn off the power, the captured still image is
deleted.
From the [MENU] button
INTERNAL STORAGE" to "DISABLE, " and then capture the image.
¹ Depending on the format of the input video, completion of
still-image capture might take some time.
¹ If you capture when HDCP (p. 15) is on, the still image that is
created is handled in the same way as HDCP-protected video.
It cannot be used if HDCP is off.
STILL 1–8
STILL 9–16
SDI IN 1–8
HDMI IN 1–8
Final output
Preview output
SUB PROGRAM bus
Ó
"STILL IMAGE, " set "SAVE TO

Deleting a Still Image

Here's how to delete the still image that's saved in the unit.
Ó
1 .
[MENU] button "STILL IMAGE"
IMAGE," and press the [VALUE] knob.
2 .
Use the [VALUE] knob to select the still image (ALL, STILL
1–16) you want to delete, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 .
Use the [VALUE] knob to select "YES," and press the
[VALUE] knob.
The still image is deleted. When the operation is finished, the
message "COMPLETE" appears.
4 .
Press the [MENU] button to close the menu.
Video Operations
Ó
select "DELETE STILL
23