Roland V-160HD Reference Manual page 89

Menu item Value
(bold text: default value)
AUX
Adjusts the audio of the AUX bus.
AUX LEVEL
-INF–0 .0–10.0dB
AUX MUTE OFF, ON
0 .0–500msec
AUX DELAY
(0–25.0/29.9/30.0frame)
LIMITER OFF, ON
-40– -6–0dB
THRESHOLD
ENTER
Menu item
AUDIO IN 1–3/4
USB IN
Bluetooth IN
AUX SEND
AUX SEND VIDEO
HDMI IN 1–8
SDI IN 1–8
ENTER
Menu item
AUDIO IN 1–3/4
AUX EFFECT
USB IN
Bluetooth IN
HDMI IN 1–8
SDI IN 1–8
USB OUT Adjusts the audio that is output from the USB STREAM port.
USB OUTPUT LEVEL -INF–0 .0–10.0dB
USB OUTPUT MUTE OFF, ON
0 .0–500msec
USB OUTPUT DELAY
(0–25.0/29.9/30.0frame)
EQUALIZER OFF, ON
Hi GAIN
-15.0–0 .0–15.0dB
Hi FREQUENCY 1.00–10 .0–20.0kHz
Mid GAIN -15.0–0 .0–15.0dB
Mid FREQUENCY
20Hz–2 .00kHz–20.0kHz
Mid Q
0.5–1 .0–16.0
Lo GAIN -12.0–0 .0–12.0dB
Lo FREQUENCY 20Hz–100Hz–2.00kHz
Explanation
Adjusts the output volume.
This can also be adjusted by the [AUX] knob.
Turns the mute function on/off. When this is "ON, " the output audio is temporarily silenced.
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Turns the limiter on/off.
Effect Limits the output volume so that is does not exceed the specified threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
Adjusts the level that becomes the threshold at which the limiter is applied. Compression is
applied to audio that exceeds the threshold. The volume level of audio that is output is limited so
as to stay to below the threshold.
Displays the AUX SEND menu.
Value Explanation
-INF, 0dB
-INF, 0dB Adjusts the amount of audio sent to the AUX bus for each input.
-INF, 0dB
Selects how to configure the amount of signal sent to the AUX bus for HDMI/SDI IN 1–8.
AUTO Audio is automatically sent to the AUX bus in tandem with the AUX bus video selection.
MANUAL The amount of audio to send is adjusted manually.
-INF, 0dB
Adjusts the amount of audio sent to the AUX bus for each input.
-INF, 0dB * This can be set if "AUX SEND VIDEO" is "MANUAL. "
Displays the AUX EFFECT menu.
Value Explanation
Sets whether to send audio from each input to the AUX bus with effects applied or not.
DRY Sends the source audio with no effects applied.
Sends the effect-applied audio.
PRE FADER
The send volume is constant, regardless of the volume (INPUT LEVEL).
Sends the effect-applied audio.
POST FADER
The send volume can be changed by adjusting the volume (INPUT LEVEL).
Adjusts the output volume.
This can also be adjusted by the [USB STREAM] knob.
Turns the mute function on/off. When this is "ON, " the output audio is temporarily silenced.
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Turns the equalizer on/off.
Effect Adjusts the volume for each frequency band.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the volume in the high band.
Boosts or attenuates the middle band.
Adjusts the center frequency when changing the volume in the middle band.
Adjusts the width of the frequency band when boosting or attenuating the middle band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the volume in the low band.
Menu List
89