Machine Cleaning And Maintenance - Electrolux SPEEDELIGHT Installation And Operating Manual

18. Do not let cord hang over edge of table or counter.
19. To reduce the risk of fire in the heating cavity:
a. The appliance is designed for direct heating/cooking of sandwich. Any other use is
to be considered improper.
b. Do not overcook sandwiches. DO NOT place plastic or other combustible
materials, cooking utensils or other item (in all materials it could be) inside the
appliance. Place ONLY sandwiches, with the designated specific baking paper (for
models equipped).
c. If materials inside the appliance ignite, turn appliance off and disconnect the
power cord.
d. Do not leave things on the glass, do not use the cooking chamber for storage
purposes. Do not leave cooking utensils or sandwiches in the cavity when not in
use.
e. Do not use the appliance to warm sandwich in metallic pots, pans, sheets, utensils.
f. Clean regularly the glass and the upper heating plate, removing all the debris.
Carbon deposit could overheat the sandwiches and the microwaves can burn the
grease and burned deposit.
20. The maximum height of the sandwich to be cooked must not overpass 3"/75 mm.
21. During operation, pay attention to the hot zones of the exterior surface. The cooking
zones remain hot. Even with the appliance switched off.
22. As in any microwave appliance, sparks can occur inside the cooking chamber. These
sparks do not influence the safety of the user nor the appliance nor the quality of the
sandwich. If, because of the sparking, a dark mark on the metal part is visible, this can
be cleaned with a damp cloth.
23. Periodically clean the appliance, removing all traces of sandwich; failure to keep it
clean will lead to deterioration of the surfaces.
24. The supplied tool (scraper) shall to be used only for cleaning purpose. See M.4 Daily
cleaning chapter.
25. Have the appliance fully checked periodically (at least once a year). For that purpose,
it is advisable to stipulate a maintenance contract.
26. It is hazardous for anyone other than a competent person to carry out any service or
repair operation that removal of any cover which gives protection against exposure to
microwave energy
SAVE THESE INSTRUCTIONS CAREFULLY FOR FURTHER CONSULTATION BY THE
VARIOUS OPERATORS
A.8

Machine cleaning and maintenance

• Work on the electrical equipment must only be carried out by a specialised electrician or
the After- Sales Service.
• Before carrying out any cleaning or maintenance, disconnect the appliance from the
power supply and carefully unplug it.
• During maintenance, the cable and plug must be kept in a visible position by the
operator carrying out the work.
• Do not touch the appliance with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Respect the requirements for the various ordinary and extraordinary maintenance
operations. Non-compliance with the instructions can create risks for personnel.
• Maintenance, checking and overhaul operations must only be carried out by a
specialised technician or the Customer Care Service, provided with suitable personal
protection equipment (safety shoes and gloves), tools and ancillary means. Refer to
"C.9 Personal protection equipment" for suitable personal protection equipment.
10