Electrolux SPEEDELIGHT Installation And Operating Manual page 34

Anomaly Anomaly type
LID_BLK Blocking machine
MAG1 Only logged: no
warning
MAG2 Only logged: no
warning
R_WT Blocking machine
R_UP Blocking machine
WT_TO Blocking machine
UP_TO Blocking machine
FAN1_SP Warning
FAN1_F Warning
34
Description Possible causes
Locked lid: the
• The lid is blocked;
machine cannot open
• The lid is intentionally
the lid.
Lid unlocking group dis-
connected/fault/dirt/
gripped.
Possible high voltage MAG1 signal absent;
electrical circuit
HV Capacitor C1 fault;
malfunctioning.
Diode box D1 fault;
MAG1 fault;
If MAG1 & MAG2 check
KS2.
Possible high voltage MAG2 signal absent;
electrical circuit
HV Capacitor C1 fault;
malfunctioning.
Diode box D1 fault;
MAG2 fault;
If MAG1 & MAG2 check
KS2.
Working top heater Triac TY2 fault on ACU;
malfunction: no cur-
Heater not properly
rent on the heater
cabled;
Heater fault.
Upper plate heater
Triac TY1 fault on ACU;
malfunction: no cur-
Heater not properly
rent on the heater.
cabled;
Heater fault.
The working top heat- Heater damaged.
ing element has
current, but doesn't
heat enough.
Upper plate heater PT1000 temp. sensor not
element has current, in contact with heating
but doesn't heat plate;
enough.
Heater damaged.
Air duct or Fan 1 dirty;
Fan 1 is not running
properly.
Fan 1 fault.
Fan 1 is not running Fan 1 not properly cabled;
Air duct or Fan 1 dirty;
Fan 1 fault.
Actions
• Turn OFF and ON the appli-
either lowered for
• Verify if the handle can
slightly warming up the
sandwich or kept
• Check if there are food
closed at the end of the
cooking cycle for
increasing the heating
of the sandwich;
Try to open handle and gently
force open the lid. Either clean
or lubricate the pushers.
If the problem persists, call
Service.
Check if possible to feel heat
from the glass (WITHOUT
TOUCHING IT!!!)
Check:
1. If possible to feel heat from
2. If any visible damages at
Call Service and report the
finding.
Try to reset the Error by switch-
ing Off/On: if Off/On
unsuccessful, call Service.
Try to reset the Error by switch-
ing Off/On: if Off/On
unsuccessful, call Service.
Check:
1. If any visible dirt at the filters
2. If any fan sound can be
Report to service if needed.
Check:
1. If any visible dirt at the filters
2. If any fan sound can be
ance. Lid should unlock;
move freely;
residuals or other foreign
bodies on the pushers and
to check if there is anything
hindering the movement of
the handle;
the upper plate (WITHOUT
TOUCHING IT!!!);
the flexible tube of the lid;
louvers;
heard when operating with
the machine Report to serv-
ice if needed.
louvers;
heared when operating with
the machine