Table of Contents
Advertisement
C. Use the delivered Teflon brush 653623; do not use any
razor blade or metallic tool.
UPPER PLATE
DETERGENT
1 min
D. Clean the surface of the upper plate with a new cloth-
paper;
E. Rinse with a wet cloth-paper;
Filters cleaning
A. Use a Phillips screwdriver (type PH1 or PH2) to unlock the
left and right front bezels ("1" in the figure below);
B. Gently lift the bottom of the covers and slide them
downwards ("2" in the figure below);
N
APPLIANCE MAINTENANCE
WARNING
every
months
Refer to "Safety Information"
N.1
Care information
The following care operations have to be carried out by the
owner and/or user of the appliance.
IMPORTANT
Problems resulting from poor or lack of care as
hereinafter described will not be covered by the
warranty.
WARNING
Before carrying out any cleaning
or maintenance, disconnect the
appliance from the power supply.
42
2
1
6
C. Remove the filters from the masks and carefully clean
them from grease, crumbs and dust, then dry the filters;
D. Separately clean the masks eliminating any deposits
deposited in the ventilation grooves, especially from the
inside, then dry the masks carefully;
E. Use a vacuum cleaner to remove any dirt or dust from the
left and right front louvers prior to reposition the bezels;
F. Reposition the dry filters in the masks and gently insert
them into the front until they adhere to the edges.
G. Tighten the screws to fix the covers.
H. Unlock the upper heating plate ("1") by pushing the
unlocking nut backward ("2"); have high care not to turn
the upper heating plate that would provoke flexible hose
damages;
Guide the flexible tube to avoid damages.
2
H2O
Continue with step 13 of the daily clean (place the RTP
under the upper heating plate and secure it closing the 4 clips).
• Intensive use of the appliance can lead to situations where
the limit of use is reached prematurely. Therefore in case
the upper plate, the upper plate flex or the lid have difficulty
in automatically disengaging, we suggest to lubricate the
points as indicated in the following pictures.
N.2
Decommissioning
If the machine cannot be repaired, carry out the decommis-
sioning operations, signalling the failure with a suitable sign,
and request assistance of the manufacturer's Customer Care
service.
1
Hide quick links:
Advertisement
Table of Contents
