Table of Contents
Advertisement
Time Dispense Mode
Thermo Scientific
Display Legend: Below is a screenshot of the screen display for the drive in
Time Dispense Mode. An explanation of the information on the screen follows.
Screen
Figure 3-4. Time Dispense Mode Screen
A. Mode Display: Current operating mode.
B. Setup
flow rate, tubing calibration, sounds, cumulative volume, and Main
Menu. The Setup screen contains some functions that can be accessed
from the Time Dispense Mode operation screen, including: pump
direction, on/off time, batch count, remote control, and keypad lockout.
C. Flow Direction: Pressing the ENTER key on this icon toggles between
clockwise and counterclockwise flow direction.
D. Pump ON Time: When this field is highlighted the drive is ON.
NOTE: The drive will not show 00:00 when switching from ON to
OFF Time.
E. Pump OFF Time: When this field is highlighted the drive is OFF.
F. Batch Count: Displays the number of cycles dispensed in the batch.
G. Local/Remote
the Remote Control setup screen. This icon indicates whether your
drive is in Local or Remote Control mode. If the solid rectangle
appears in the center of the figure the drive is set to be operated locally.
If the solid rectangle does not appear in the center of the figure the
drive is set to be operated by remote control.
H. Key Pad Lock
Keypad Lockout screen. Locking the keypad will prevent someone
from changing the settings on the drive. When locked this icon
changes to
I. Time Display: The center digits show the remaining time of the drive
in the ON or OFF Time highlighted on the right of the display
(position D or E, Figure 3-4).
A
TIME DISP. MODE
I
00:00:00
G
H
1000/2000
: The Setup screen can be used to select flow units, tubing size,
or
: Pressing the ENTER key on this icon goes to
: Pressing the ENTER key on this icon goes to the
.
FH100D/FH100DX Dispensing Pump Operating Manual
B
C
D
ON
E
OFF
F
Section 3
Operation
3-9
Advertisement
Table of Contents
