Component Layout; Ada / Ansi / Ul - Assa Abloy Norton 5700 Series Installation And Instruction Manual

POWER SWITCH
Included with 5710 and 5740
SLIDE ARM
TUBE
DRIVE SOCKET
BUFFER STOP
Americans With Disabilities Act (A.D.A.)
These door operators can be installed and adjusted to conform with
A.D.A. regulations.
ANSI Standards
ANSI A117.1 – These door operators permit door
assemblies to conform to the requirements of this
specification "for buildings and facilities – providing
accessibility and usability for physically
handicapped people".
• ANSI A156.19 – These products are designed to conform to this
specification "for power assist and low energy power
operated doors".
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2010, 2013 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
BREAKER SWITCH
1600 SERIES
CLOSER BODY
"T1" POWER INPUT
TERMINAL (3-POSITION)
SLIDE ARM
ROD
9/64" HEX
SCREW
SLIDE TRACK
ASSEMBLY
ADA / ANSI / UL Information

Component Layout

MOTOR ASSEMBLY
CHAIN
PINION EXTENSION /
CLUTCH ASSEMBLY
ACCESSORY
TERMINAL
(4-POSITION)
ADJUSTING
TUBE
SLIDER
MAIN ARM / SLIDE
UNIT ASSEMBLY
– "PAS" Function is designed to meet or exceed all of the
requirements for the "Power Assist Door".
– "POR" Function is designed to meet or exceed all of the
requirements for the "Low Energy Power Operated Door".
U.L. Listing
Page 3
INVERTER
REED SWITCH
OPEN / CLOSE
POSITIONING
MAGNETS
Included with 5730 and 5740
CONNECTING LINK
BUSHING ASSEMBLY
SHOE / ADJUSTING
ROD ASSEMBLY
Underwriters Laboratories, Inc. listed for use on
fire and smoke barrier door assemblies when the
120VAC (60Hz) power input is supplied through
the normally closed alarm contacts of a
compatible UL Listed alarm system or alarm
panel.
ASSA ABLOY
BACKPLATE
SHOE
FOREARM
SCREW
MAIN ARM
80-9357-0001-020 (09-13)