Table of Contents
Advertisement
Adjusting the Flash Output
(Flash Exposure Compensation)
You can adjust the flash output for flash photography.
• This setting cannot be adjusted in the
mode, it can only be adjusted for the first image.
• The selected shooting mode will determine whether or not the flash exposure
compensation setting is memorized even when the camera power is turned off (p. 85).
• The flash exposure compensation mode only functions with the built-in flash or an
externally mounted EX series Speedlite or a Macro Ring Lite (p. 123).
• In the
shooting mode, the built-in flash will only fire at full intensity, but you can
adjust the output of an EX series Speedlite or the Macro Ring Lite.
74
Shooting - Selecting Particular Effects
Press the
1
times.
• The
icon and the flash exposure
compensation bar will appear in the display
panel. The flash exposure compensation bar
will also appear in the LCD monitor if it is on.
Press the
2
selector to expand or contract the
range.
• The flash exposure compensation can be adjusted
in 1/3 steps within a range of -2EV to +2EV.
Press the
3
• You can also take the picture with the set flash
exposure compensation value by pressing the
shutter button directly instead of the
• To cancel the setting, press the
on the omni selector to reset it to .
Shoot the image.
4
• If you pressed the shutter button at Step 3,
the
icon and the flash exposure
compensation bar will reappear after the shot,
allowing you to change the setting for the
next shot.
or
arrow on the omni
button.
,
and
shooting modes. In
button four
button.
or
arrow
Hide quick links:
Advertisement
Table of Contents
