Shooting - Letting The Camera Select Settings; Auto Mode - Canon PowerShot G2 (PC1015) Reference Manual

Shooting - Letting the Camera
Select Settings

Auto Mode

In this mode, all you have to do is press the shutter button and let the camera do
everything else.
AF Frame
1
Turn the mode dial to
Aim the camera at the subject.
2
3 Operate the zoom lever to achieve the
desired composition (relative subject
size in the viewfinder).
4 Press the shutter button halfway (p. 36).
• Two beeps will sound when the camera has
finished metering and the indicator beside the
viewfinder will shine green or orange. If the LCD
monitor is on, the AF frame will appear green.
• The shutter speed and aperture settings are
automatically determined and show in the
display panel. They also appear on the LCD
monitor if it is on.
• The yellow indicator will flash and the beep will
sound one time if the subject is difficult to
focus upon. The AF frame will also appear
yellow.
Press the shutter button all the way
5
(p. 36).
• You will hear the sound of the shutter when
the shutter activates.
• The picture will appear for 2 seconds in the
LCD monitor if it is open.

Shooting - Letting the Camera Select Settings

.
41