Canon PowerShot G2 (PC1015) Reference Manual page 11

To Immediately Delete the Displayed
Image
1. Press the button while the image is displayed.
2. Confirm that [Erase] is selected and press the
button.
Turn the mode dial (upper dial) to
6
(p. 41).
Compose the picture and focus (p. 36).
7
Aim the camera and lightly press the shutter
button halfway. Two beeps will sound when the
autofocus is set.
Shoot (p. 36).
8
Press the shutter button all the way. You will hear
the sound of the shutter close when the shot is
complete.
9 View the recorded image (p. 42).
The recorded image will display in the LCD
monitor for approximately 2 seconds. Keep your
finger on the shutter button or press the Set
button while the image is displayed to continue
to display the image after the shutter button is
released.
9
Quick Start