Canon PowerShot G2 (PC1015) Reference Manual page 139

Unidentified Image:
Protected!:
Too many marks:
Cannot mark image:
Cannot complete!:
Cannot edit:
The following message may appear on the camera's LCD monitor when a
Direct Print compatible printer is printing. Other messages may also appear
depending on your printer model (Additional Information p. 11).
No Paper:
No Ink:
Ink Cassette Error:
Paper Jam:
Communication Error:
Cannot trim:
Readjust trimming:
Cannot Print!:
Could not print xx images: You attempted to use the DPOF print settings to print
You attempted to replay an image that was recorded
in a special format (proprietary format used by the
camera of another manufacturer, etc.), or to replay a
movie shot in another camera.
You attempted to erase a protected image.
Too many images have been marked for printing or for
inclusion in a slide show. Cannot process any more.
You attempted to set the print settings for an non-
JPEG file.
Couldn't save the print or slide show settings.
Slide show settings file is corrupted
Paper cassette is incorrectly inserted or out of paper.
Or the paper feed isn't operating correctly.
The ink cartridge has not been inserted or has run out
of ink.
The ink cassette is experiencing a problem.
The paper jammed during printing.
The printer is experiencing a data transmission error.
You attempted to trim an image from another
camera, one recorded in a different format, or one
that has been edited on a computer.
You attempted to print the image with a different style
than the one used when the trimming settings were set.
You attempted to print an image from another
camera, one recorded in a different format, or one
that has been edited on a computer.
xx images that are from another camera, that have
been recorded in a different format, or that have been
edited on a computer.
137
Appendices