Adjusting The Flash Output (Flash Exposure Compensation) - Canon PowerShot S30 User Manual

Adjusting the Flash Output
(Flash Exposure Compensation)
You can adjust the flash output for flash photography.
1
Press the
times.
• The
compensation bar appears on the LCD monitor.
Expand or contract the range using B
2
or A on the multicontroller.
• The flash exposure compensation can be adjusted in 1/3 steps within a
range of -2EV to +2EV.
3
Press
• You can also take the picture with the set flash exposure compensation value
by pressing the shutter button without pressing
• To cancel the setting, return the setting to
multicontroller.
4
Shoot the image.
• If you pressed the shutter button at Step 3, the
exposure compensation bar will reappear after the shot, allowing you to
change the setting for the next shot.
• This setting cannot be adjusted in the
mode, it can only be adjusted for the first image.
• The macro mode cannot be set while the flash exposure compensation bar
appears on the LCD monitor.
• The selected shooting mode will determine whether or not the flash exposure
compensation setting is cancelled when the camera is turned off (p. 90).
Downloaded From camera-usermanual.com
78
Shooting - Selecting Particular Effects
icon and the flash exposure
.
button four
using B or A on the
, and
.
icon and the flash
shooting modes. In