Adjusting The Flash Output (Flash Exposure Compensation) - Canon PowerShot S30 User Manual

Adjusting the Flash Output
(Flash Exposure Compensation)
You can adjust the flash output for flash photography.
1
Press the
times.
• The icon and the flash exposure
compensation bar appears on the LCD monitor.
Expand or contract the range using B
2
or contrac or contrac
or A on the multicontroller.
n the multico the
• The flash exposure compensation can be adjusted in 1/3 steps within a sh exposure co sh exposure co
range of -2EV to +2EV. f -2EV to + f -2EV to +2
3
Press .
• You can also take the picture with the set flash exposure compensation value
by pressing the shutter button without pressing
• To cancel the setting, return the setting to
multicontroller.
4
Shoot the image. the image. he image.
• If you pressed the shutter button at Step 3, the pressed the sh ressed the sh
exposure compensation bar will reappear after the shot, allowing you to re compens re compens
change the setting for the next shot.
• This setting cannot be adjusted in the
mode, it can only be adjusted for the first image.
• The macro mode cannot be set while the flash exposure compensation bar
appears on the LCD monitor.
• The selected shooting mode will determine whether or not the flash exposure
compensation setting is cancelled when the camera is turned off (p. 90).
78
Shooting - Selecting Particular Effects
bar ap bar a ears on ears on n the LCD m n the LCD m
ct the rang ct the ran the r
icontroller. icontroller ntro
compen compen
tton wit ton ton wi
eturn the sett eturn the sett urn the se
ller. ller.
tter but tter but
button four
osure osure
monitor. mo nitor.
B
nge using nge using
er.
he set flash e e set flash e t flash exposure co exposure c
out pressing out pressing ut pressin
using B or A on the
ting to ting g to u usi us
, and
.
or or
icon and the flash
shooting modes. In