Program Ae - Canon PowerShot G2 (PC1015) Reference Manual

Program AE

Use the program AE mode to have the camera automatically set the shutter speed
and aperture settings to match the brightness of the scene.
• If a correct exposure cannot be obtained, the shutter speed and aperture settings
blink in the display panel and show in red in the LCD monitor. Use the following
methods to shoot.
- Use the flash.
- Adjust the exposure using spot metering, exposure compensation or flash
exposure compensation.
- Switch the shooting mode to
Differences and Similarities between the
• Both modes automatically select the shutter speed and aperture settings.
• The following settings can be adjusted in
- Exposure Compensation
- AEB Mode
- Built-In Flash (Red-Eye Reduction On / On)
- Continuous Mode
- Image Adjustment (ISO Speed, Contrast, Sharpness and Saturation) Settings
- Light Metering Method
- AF Frame
- FE Lock
1 Turn the mode dial to .
Shoot the image.
2
• The shutter speed and aperture settings will be
set automatically and shown in the display
panel. They will also appear in the LCD monitor
if it is on.
• The correct exposure has been set if the shutter
speed and aperture settings do not blink in the
display panel.
(Manual).
Shooting - Selecting Particular Effects
and
mode, but not in
- White Balance
- Flash Exposure Compensation
- File Format Settings
- Manual Focus
- AE Lock
Modes.
mode.
61