Table of Contents
Advertisement
Charging the Battery Pack
To a Car's Cigarette
Lighter Socket
22
Preparing the Camera
Attach the car battery cable to the
1
charge adapter.
2
With the engine running, plug the car
battery cable into the cigarette lighter
socket.
Attach the battery pack.
3
• Align the battery pack with the
charge adapter and slide it in the direction of
the arrow.
• Up to two Battery Pack BP-511s can be placed
in the charge adapter simultaneously.
• Either slot, A or B, can be used to charge a
single battery pack. When two are placed in the
charge adapter, the first one to be installed will
start charging. The second battery pack will start
charging after the first has been fully charged.
• If two battery packs have been placed in the
charge adapter before it is plugged into the
cigarette lighter socket, the one placed in the A
side will charge first. (B side will start after A side
is fully charged.)
• The red light will flash while a battery pack is
charging and shine steady when it is charged.
• It takes approximately 80 minutes to charge a
single battery pack.
After charging, remove the battery pack.
4
• Remove the battery pack by sliding it in the
opposite direction from which it was installed.
▲
mark on the
Hide quick links:
Advertisement
Table of Contents
