List of Error / Message Codes
The following error and message codes may appear on the display panel.
The camera has experienced a problem. Turn the main dial to
wait a second, and then try shooting or replaying. If the error code
appears repeatedly, there is a problem. Note the error code number
and take the camera in for servicing. If an error code appears
immediately after a shot, there is a chance that the image was not
recorded. Check the image in replay mode.
Connected to computer in PC connection mode.
Adequate battery charge.
Low battery charge. Charge the battery as soon as possible to use for
any length of time.
Battery charge low, camera will not operate. Immediately recharge or
replace the battery pack with a charged one.
Could also indicate that the battery cover is open. Close the cover
No CF card in camera, CF card slot cover is open, or CF card error.
Power turned on with lens cap on. Remove cap, then turn power off
and on again.