Set Mode - Icom IC-455 Instruction Manual

8

SET MODE

■ Set mode
You can change various common settings for the transceiver or individual settings for the
operating channel in the Set mode. Essentially, you can customise the transceiver to suit
your preference and operating style.
The functions you can use may differ, depending on the presetting set with the optional
CS-455 programming software.
D Using the Set mode
Follow the procedures described below to select a Set menu item.
Example: Setting the beep to "Off."
1. Push [MENU].
• The "Menu" screen is displayed.
2. Push [▲] or [▼] to select "Settings," and then push
[ENT].
• The "Settings" screen is displayed.
L Holding down [▲] or [▼] sequentially scrolls up or down
through the "Settings" screen.
3. Push [▲] or [▼] to select "Beep," and then push [ENT].
• The "Beep" screen is displayed.
4. Push [▲] or [▼] to select "Off," and then push [ENT].
• "Off" is set.
L Push [CLEAR] to return to the previous screen.
D Set mode items
Items
CTCSS/DTCS
Mic Gain
Roger Beep
Beep
Beep Level
Scan Resume
Scan Restart
Lockout
Power Timer
Internal SP
Voice Guidance
Signal Indication
PTT Hold
Contrast
26
Reference
Backlight
Brightness
Voice Recorder
Clear Rec Data
p. 27 Noise Reduction
Reset
Mic Hanger
Scrambler
Auto Volume
Equalizer
Color
p. 28 Ignition Sense
Voice Changer
Items Reference
pp. 24, 29
p. 28
p. 29
p. 29
p. 30