Icom IC-455 Instruction Manual page 9

D Function display
1 SIGNAL STRENGTH ICON
Displays the relative receive signal
strength level.
L " " blinks when the ATS function is
turned ON. (p. 22)
2 SCAN ICON
Displayed when a scan mode is
selected.
: O pen Scan (p. 12)
: G roup Scan (p. 13)
: P riority Scan (p. 13)
: D ynamic Group Scan (p. 14)
: R epeater Scan (p. 15)
3 INTERNAL SPEAKER MUTE ICON
Displayed when the audio volume level
is set to 0 (Mute mode). (p. 5)
4 LOW POWER ICON (p. 7)
Displayed when the low output power is
selected.
5 QUIET ICON (p. 21)
Displayed when the Quiet function is
turned ON. (Selcall mute is activated.)
6 SCRAMBLER ICON (pp. 24, 29)
Displayed when the Scrambler function
is turned ON.
7 TONE ICON (p. 16)
• Displays "T" while the Subaudible tone
encoder is used.
• Displays "SQL" while the Subaudible
tone encoder is used on a receive
channel.
• Displays "TSQL" while the Tone
Squelch function is turned ON.
1 2 3 4 56
14
13
PANEL DESCRIPTION
7 8 9
10
11
12
8 BELL ICON
• Displayed when the Pocket Beep
function is turned ON. (p. 17)
• Blinks when the specified Selcall or
Smart Ring call is received.
(pp. 20, 22)
9 VOICE RECORDER ICON (p. 8)
Displayed when there is a recorded
message.
10 CHANNEL READOUT
Displays the selected operating channel
number.
11 CTCSS/DTCS READOUT
• Displays the CTCSS tone frequency
or DTCS code. (pp. 14, 16)
• Displayed when the Tone Squelch
function or the Pocket Beep function is
turned ON. (pp. 16, 17)
12 NAME DISPLAY
Displays the operating channel name
and channel type.
13 PRIORITY CHANNEL ICON (p. 7)
Displayed when the Priority channel is
set.
14 TAG CHANNEL ICON (p. 11)
Displayed when a Tag channel is
selected.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
3