Summary Of Changes; Overview Of Contents - Motorola MVME5100 Manual

Summary of Changes

The following changes were made for the 4th revision of this manual.
Date
08/2001
02/2003
07/2003
03/2006

Overview of Contents

The following paragraphs briefly describe the contents of each chapter.
Chapter 1, Hardware Preparation and
its main integrated PMC and IPMC boards. The remainder of the chapter includes an
explanation of the installation procedure, including preparation and jumper setting information.
Chapter 2, Operation, provides a description of the operational functions of the MVME5100
including tips on applying power, a description of the switch settings, the status indicators, I/O
connectors, and system power up information.
Doc. Rev Changes
V5100A/IH2 A correction was made on page 1-5 to change
the explanation of the jumper settings for Flash
Bank A and B. Flash Bank B (0) is the factory
setting. Memory Map information was also
added to Chapter 6, Programming Information.
Appendix B, Specifications was updated, and
Appendix D, RAM500 Memory Expansion
Module was added. Other corrections were
made throughout the manual. This section
titled "About this Manual" was also added.
V5100A/IH3 Changes were made to pages 1-4 and 5-2
respectively to clarify the explanation for J16 to
state that the setting of jumpers 2 and 3 only
write protect the upper 64KB of Flash memory.
Additional corrections were made to Table 5-
15 to duplicate information in Rows Z and D
from Table 5-14 and to add note below Table 5-
15.
V5100A/IH4 Changes were made to this section to update
model numbers and descriptions to coincide
with the MVME5100 Datasheet. Changes
were also made to correct the address of the
DS1621 from $A6 to $96. Changes were also
made to specifications for additional power
ratings and additions were made to a new
thermal rating chart.
V5100A/IH5 A section on the Software Readable Switch,
S1, was added to the Preparation section of
Chapter 1. Table 5-14, Pins 1-6, Row C was
updated to reflect the correct pinout for the P2
ethernet when using IPMC. Figure 1-1 and
Table 1-2 were updated to reflect the correct
jumper settings.
Installation, provides a description of the MVME5100 and
MVME5100 Installation and Use (V5100A/IH5)
About This Manual
xvii