Inserting Fronius Datamanager 2.0 Into An Inverter; General; Safety; Fronius Datamanager 2.0 Plug-In Positions - Fronius Datamanager 2.0 Operating Instructions Manual

Inserting Fronius Datamanager 2.0 into an Inverter

General

Please see the Operating Instructions for the respective inverter for information regard-
ing plug-in card installation. Please note the safety and warning information in your in-
verter's Operating Instructions.

Safety

Danger from grid voltage and DC voltage from solar modules.
An electric shock can be fatal.
▶
▶
▶
▶
▶
▶
▶
Danger of residual voltage from capacitors.
An electric shock can be fatal.
▶
Follow general ESD guidelines when handling plug-in cards.
Fronius Dataman- The Fronius Datamanager 2.0 plug-in position is specified for each inverter type:
ager 2.0 plug-in
positions
Inverter
Fronius IG 15–60
Fronius IG 300–500
Fronius IG Plus,
Fronius IG Plus V
Fronius CL
Fronius Galvo
Fronius Symo
Fronius Primo
*)
WARNING!
The connection area should only be opened by an authorized electrician.
The separate power stage set area should only be disconnected from the connec-
tion area after first being disconnected from the grid power.
The separate power stage set area should only be opened by Fronius-trained ser-
vice personnel.
Before making any connections, make sure that the AC and DC sides in front of the
inverter are not charged, e.g.:
Switch off the AC automatic circuit breaker for the inverter
Cover solar modules
Please observe the 5 safety rules.
WARNING!
Wait until the capacitors have discharged.
Plug-in position
ENS slot
ENS slot
on the far right, unless a ML-MON plug-in card is present
on the far right, unless a ML-MON plug-in card is present
does not matter
does not matter
does not matter
If an ENS plug-in card is inserted in the ENS slot: insert the Fronius Dataman-
ager 2.0 in the next slot to the right of the ENS slot.
IMPORTANT!
*)
*)
33