Fronius Datamanager 2.0 Operating Instructions Manual page 14

(1)
(2)
(3)
(4)
(5)
When linking several DATCOM components to Fronius Datamanager 2.0:
Use the data cable to connect the IN connection socket of Fronius Datamanager 2.0 with
the OUT connection socket of the next DATCOM component. A Fronius Solar Net ter-
mination plug must be inserted into the empty IN connection socket of the last DATCOM
component.
With the following inverters, the inverter with Fronius Datamanager 2.0 must always be
connected either at the start or end of the data chain:
Fronius IG, Fronius IG Plus, Fronius IG Plus V, Fronius IG Plus A, Fronius CL, Fronius
CL USA and Fronius IG 300–500.
Linking Two Inverters with Fronius Com Card or Com Card Function to a Fronius
Datamanager Box 2.0 and a Smartphone:
14
(1)
(3)
LAN / WLAN
IN
(2)
Inverter with
Fronius Datamanager 2.0
PC/laptop
Inverter with
Fronius Com Card
(1) (2)
= =
~
OUT
IN IN
(5)
(4)
IN
OUT (5)
(6) Fronius Sensor Box
(7) Inverter
(8) Fronius Com Card
(9) Fronius Solar Net termination
plug
Fronius
~
Datamanager Box 2.0
OUT
IP
B A
(3)
(7)
(6)
OUT
IN
IN
OUT
(8)
Fronius
Solar.web App
WLAN
IN OUT
(5)
(9)
(4)