Scope Of Supply; Using The Sticker Labels - Fronius Datamanager 2.0 Operating Instructions Manual

Unless otherwise expressly permitted by the manufacturer, changes or modifications to
the wireless module are not allowed and lead to a loss of the right of use of the device by
the user.

Scope of Supply

Fronius Datamanager 2.0 plug-in card
-
-
-
-
Additional equipment depending on the inverter:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Fronius Datamanager Box 2.0
-
-
-
-
-
-
-
-
-
Using the Sticker IMPORTANT! If the three-part sticker label included in the scope of supply for the
Labels Datamanager 2.0 has not already been affixed to the inverter at the factory, this must be
done now.
Position of the sticker label on the inverter:
12
1 x Fronius Datamanager 2.0 plug-in card
1 x Fronius Solar Net termination plug
1 x 16-pin plug
1 x FCC sticker label, three parts
1 x antenna
1 x Fronius Solar Net termination
plug
1 x antenna
1 x 1 m RG58 antenna cable
1 x mounting bracket
1 x double-sided adhesive tape
1 x antenna
1 x 3 m RG58 antenna cable
1 x mounting bracket
1 x double-sided adhesive tape
1 x antenna
1 x 0.4 m RG58 antenna cable
1 x 3/4 in. screw joint
1 x 3/4 in. hex nut
1 x 3/4 in. seal
1 x Fronius Datamanager Box 2.0 with wall bracket
2 x Fronius Solar Net termination plugs
1 x 16-pin plug
1 x antenna
1 x 3 m RG58 antenna cable
1 x mounting bracket
1 x double-sided adhesive tape
2 x installation anchors + screws
1 x "DATCOM Cabling" leaflet
Fronius Galvo
Fronius Symo
Fronius Primo
Fronius IG
Fronius IG Plus
Fronius IG Plus V
Fronius IG 300 - 500
Fronius CL
Fronius CL - USA
Fronius IG 2000 - 5100 - USA
Fronius IG Plus - USA
Fronius IG Plus V - USA