Assembly Procedure - R Series Total Body - CYBEX R Series Assembly Instructions Manual

Assembly Procedure - R Series Total Body

Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully.
If there is damage, see the Customer Service section of this manual for proper procedure to return, replace,
or reorder parts.
The words "left" and "right" denote the user's orientation.
Verify you have received the correct package
1. Read box label to verify the model number and voltage (optional) match what was ordered.
2. Verify paint color matches what was ordered.
Verify Parts List Shown Below
Components
Item Description
1 Base Assembly
2 Console Assembly
3 Cover, Console Back
4 Weldment, Console
5 Bracket, Lower
6 Base, Accessory Tray
7 Cover, Top, Accessory Tray
8 Cover, Bottom, Accessory Tray
9 Cover, Rear, Top, Right
10 Cover, Rear, Lower, Right
11 Cover, Rear, Top, Left
12 Cover, Rear, Lower, Left
13 Foot Pad
14 Assembly Instructions
15 Hardware Pack 1
16 Hardware Pack 2
17 *Wire Harness
NOTE: *Cabling varies depending on base and console.
Page 27 of 47
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1