Subscribe to Our Youtube Channel
Related Manuals for CYBEX Big Iron 19300
Summary of Contents for CYBEX Big Iron 19300
- Page 1 Big Iron 19300 Glute Ham Owner's Manual Strength Systems Part Number 19300-999-4 B www.cybexintl.com...
-
Page 2: Table Of Contents
Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. -
Page 3: Safety Guidelines And Practices
• Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position. -
Page 4: User Safety Precautions
• DO NOT pin weights on selectorized equipment in an elevated position or use the machine if found in this position • DO NOT increase weight resistance on equipment by any means other than those provided by Cybex. • DO NOT wear loose or dangling clothing or jewelry while using equipment. Stay clear of moving parts. -
Page 5: Warnings And Cautions
Big Iron 19300 Glute Ham Part Number 19300-999-4 B Warnings and Cautions Warning labels indicate a potentially hazardous situation that could result in serious injury or death if the precautions are not observed. Caution labels indicate a potentially hazardous situation that could result in serious injury or damage to machine if the precautions are not observed. -
Page 6: Label Placement
Big Iron 19300 Glute Ham Part Number 19300-999-4 B Label Placement The following diagram shows where each label is located. Description DE000015-X 8500-025-X Page 6 of 16... -
Page 7: Assembly
Big Iron 19300 Glute Ham Part Number 19300-999-4 B Assembly Machine Specifications 19300 Glute Ham Weight Machine Dimensions at Rest Machine Dimensions at Use 225 Lbs 32” W × 65” L × 48” H Same 102 Kg 81 cm W × 165 cm L × 122 cm H... -
Page 8: Environment
Big Iron 19300 Glute Ham Part Number 19300-999-4 B Environment Humidity and Static Electricity The unit is designed to function normally in an environment with a relative humidity range of 30% to 75%. The unit can be shipped and stored in a relative humidity range of 10% to 90%. - Page 9 • Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position.
-
Page 10: Exercise
Big Iron 19300 Glute Ham Part Number 19300-999-4 B Exercise Intended Use The intended commercial use of this machine is to aid exercise and improve general physical fitness. Instructions Read and understand all instructions and warnings prior to using this machine in the Safety section of the Owner’s Manual. -
Page 11: Maintenance
Do Not inhale or swallow any cleaning product. Protect surrounding area/clothing from exposure. Use in well ventilated area. Follow all product manufacturer’s warnings. Cybex and its vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products. - Page 12 Big Iron 19300 Glute Ham Part Number 19300-999-4 B Then 1. Prepare a solution of 10% household bleach (sodium hypochlorite) and 90% water. Dampen a soft white cloth in the solution. 2. Rub gently on the stained area. 3. Dampen a clean soft cloth in water and rinse area.
-
Page 13: Weekly Procedures
Big Iron 19300 Glute Ham Part Number 19300-999-4 B To Minimize Fine or Hairline Scratches: Mild automotive polish applied and removed with a soft clean cloth will help fill scratches. Suggested Polishes: • Johnson Paste Wax • Mirror Glaze #10 Plastic Polish (by Mirror Bright Polish Co.) •... -
Page 14: Customer Service
Hours of phone service are Monday through Friday from 8:30 a.m. to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239. For Cybex customers living outside the USA, contact Cybex Customer Service at 508-533-4300 or fax 508-533-5183. Email address internationaltechhelp@cybexintl.com... -
Page 15: Return Material Authorization (Rma)
Contact your authorized Cybex dealer on all warranty-related matters. Your local Cybex dealer will request a RMA from Cybex, if applicable. Under no circumstances will defective parts or equipment be accepted by Cybex without proper RMA and an Automated Return Service (ARS) label. - Page 16 10 Trotter Drive, Medway, MA 02053 • 888-462-9239 • 508-533-4300 • FAX 508-533-5183 www.cybexintl.com...
Need help?
Do you have a question about the Big Iron 19300 and is the answer not in the manual?
Questions and answers