Table of Contents
Advertisement
•
Stainless steel reflective surface models are also available. See datasheet p/n 67200.
•
Robust construction, two mounting brackets and hardware included.
•
EZA-MBK-2 adapter bracket is required for use with MSA Series stand, see
Note: Brackets may be inverted from the positions shown, decreasing dimension L1 by 58 mm (2.3 in).
Mirror
Defined Area Length
Model 9
SSM-200
150 mm (5.9 in)
SSM-375
300 mm (11.8 in)
SSM-550
450 mm (17.7 in)
SSM-675
600 mm (23.6 in)
SSM-825
750 mm (29.5 in)
SSM-975
900 mm (35.4 in)
SSM-1100
1050 mm (41.3 in)
SSM-1275
1200 mm (47.2 in)
SSM-1400
1350 mm (53.1 in)
SSM-1550
1500 mm (59.0 in)
SSM-1750
1650 mm (65.0 in)
SSM-1900
1800 mm (70.9 in)
8.2.9 Accessory Mounting Brackets
See Section 2.4 for standard brackets. Contact factory for more information. Order one EZA-MBK-.. bracket per sensor, two per pair.
USMB-5
•
Retrofit mounting bracket
for STI MPT21.
•
2.3 mm (0.09 in) thickness,
black zinc-plated, chromate
dip finish.
•
Mounting hardware
included: 1 kit required per
emitter or receiver.
EZA-MBK-2
Adapter bracket for SSM series mirror
and MSA series stands
9 Stainless steel reflective surface models are available by adding model number suffix "-S" (for example, SSM-375-S); range reduction for these models is
approximately 30% per mirror. See datasheet p/n 67200.
Reflective Area Y
Mounting 1
200 mm (7.9 in)
278 mm (10.9 in)
375 mm (14.8 in)
486 mm (19.1 in)
550 mm (21.7 in)
661 mm (26.0 in)
675 mm (26.6 in)
786 mm (31.0 in)
825 mm (32.5 in)
936 mm (36.9 in)
975 mm (38.4 in)
1086 mm (42.8 in)
1100 mm (43.3 in)
1211 mm (47.7 in)
1275 mm (50.2 in)
1386 mm (54.6 in)
1400 mm (55.1 in)
1511 mm (59.5 in)
1550 mm (61.0 in)
1661 mm (65.4 in)
1750 mm (68.9 in)
1861 mm (73.3 in)
1900 mm (74.8 in)
2011 mm (79.2 in)
www.bannerengineering.com - Tel: 763.544.3164
Accessory Mounting Brackets
Mounting L2
311 mm (12.2 in)
453 mm (17.8 in)
628 mm (24.7 in)
753 mm (29.6 in)
903 mm (35.6 in)
1053 mm (41.5 in)
1178 mm (46.4 in)
1353 mm (53.3 in)
1478 mm (58.2 in)
1628 mm (64.1 in)
1828 mm (72.0 in)
1978 mm (77.9 in)
USMB-6
•
Universal mounting bracket
kit.
•
2.3 mm (0.09 in) thickness,
black zinc-plated, chromate
dip finish.
•
Mounting hardware
included: 1 kit required per
emitter or receiver.
USMB-8
•
Mounting plate for 90°
sensor direction.
•
Low profile.
•
Black anodized aluminum.
•
Uses two M4 screws (user
supplied) for through-hole
mounting.
•
1 kit required per emitter
or receiver.
®
EZ-SCREEN
Type 2 Light Screen
on page 51 .
M6 x 19 mm
screw
101.2 mm
(3.98")
(4 supplied)
M5 x 10 mm
screw
(4 supplied)
L3
L1
L2
100 mm
(3.94")
115 mm
(4.53")
Y
51
Advertisement
Table of Contents
