Reading Container Data - Bartec APEX px Operating Instructions Manual

Ex p Control unit
APEX px

Reading container data

Rev. 0
Data is retrieved for the control room via a web browser or using an appropriate
software tool to be provided by the customer that is able to send an HTML GET
message equivalent to a browser request across the network to the APEX device.
The data format returned from the device is JSON
(see https://de.wikipedia.org/wiki/JavaScript_Object_Notation)
Request:
Reply from the control unit:
Code table:
Key/ID Parameter
_0x0401 Operating pressure po (setpoint)
_0x0101 Operating pressure po (actual)
_0x0402 Minimum pressure (shutdown pressure level)
_0x0403 Pre-alarm (switching value)
_0x1001 Purge pressure p3 (setpoint)
_0x0201 Purge pressure p3 (actual)
_0x0501 Maximum pressure, operation p4 (switching value)
_0x0502 Maximum pressure, purge p5 (switching value)
_0x1312 Pressure sensor A pa (actual)
_0x132A Pressure sensor B pb (actual)
_0x0602 Purge time
01-37A2-7D0001_px_Manual_Exp-Control-Unit_20210923_0_en.docx
Operation
Data for the control room can be
retrieved using the URL:
http://<ip-addr>/info_operator.json
e.g. http://192.169.1.101/info_operator.json
The username and password must be
entered.
Login: "operator"
Password: "operator"
Unit
Pa
Pa
Pa
Pa
Pa
Pa
Pa
Pa
Pa
Pa
Seconds
Page 71 of 96