Bartec APEX px Operating Instructions Manual page 55

Operation
Page 54 of 96
Procedure:
01-37A2-7D0001_px_Manual_Exp-Control-Unit_20210923_0_en.docx
Open the network settings for the LAN interface on
the PC/laptop.
Select the properties of the LAN connection by
pressing the "Properties" button.
Open the network adapter settings using the
"Configure..." button and select Advanced.
Select the "Speed & Duplex" function in the left-
hand "Property" box
Set the value in the right-hand "Value" box to "100
Mb Full Duplex" by clicking and selecting this in the
drop-down menu
Confirm changes by clicking "OK".
Call up Internet Protocol Version 4 (TCP/IP4) with a
double-click
Properties of internet protocol Version 4 (TCP/IPv4):
Click to change "Obtain IP address automatically" to
"Use following IP address".
Enter IP address 192.168.11.99 for the "IP address"
Enter subnet mask 255.255.0.0.
Confirm entries with OK.
Ex p Control unit
APEX px
Rev. 0