Epson DFX-5000+ Service Manual page 123

Disassembly and Assembly
5. Install the lift handles from the inside ofthe printer mechanism. Insert each
handle through the 2 holes in the side frames ofthe printer mechanism. Then
slowly lift the printer mechanism using the handles and remove it from the
lower case.
Figure 3-29. Lifting the Printer Mechanism
Assembly Note
When you install theprinter mechanism, route the cables us shown in Figure 3-30. Make
sure the cables do not get caught between theprinter mechanism and lower case.
EPSON DFX-5000+ Service Manual
3-27