Epson DFX-5000+ Service Manual page 131

4. Remove the left tension roller lever spring
5. Remove the E-ring securing the paper bail shaft to the right side frame and
remove the shaft holder.
6. Remove the right tension roller lever spring, and then remove the shaft holder
with its washer.
7. While lifting the paper bail assembly on the right side, remove the paper bail
gear; you can remove it easily by gently lifting the clip with tweezers.
8. Remove the E-ring at the right side of the paper bail shaft. Then remove the
paper bail lever, paper bail balance lever, leaf spring, and shaft holder.
9. Remove the paper bail assembly.
Parser Bail Lever - I
Figure 3-38. Removing the Paper Bail Assembly
EPSON DFX-5000+ Service Manual
Disassembly and Assembly
3-35