Table of Contents
Advertisement
Intended Use
The power tool is intended for chiseling work in concrete, brick, masonry and asphalt as well as for
driving in and compacting, when using the respective accessories.
Technical Data
Demolition Hammer
Rated Voltage
Frequency
Rated input
Impact frequency
Impact energy per stroke
Chisel positions
Chiselling capacity in concrete of medium
hardness
Tool holder
Weight
Sound pressure values (in accordance with
2000/14/EC)
Guaranteed Sound power values
(in accordance with 2000/14/EC)
Vibration
Protection class
The values given are valid for nominal voltages [U] of 220-240V. For lower voltages and models for
specific countries, these values can vary.
Note: Noise and vibration values are determined acc. to EN 60745-1 and EN 60745-2-6.
Note: The declared vibration value has been measured in accordance with a standard test method and may
be used for comparing one power tool with another.
The declared vibration value may also be used to evaluate the exposure for the user caused by vibration in
advance.
Warning! Depending on the actual use of the power tool the vibration values can differ
from the declared total.
Adopt proper measures to protect yourself against vibration exposures. Take the whole work
process including times the power tool is running under no load or switched off into
consideration.
XP-G55VB
220-240V~
50Hz
1500W
1000-1900
/min
6-25J
12
490kg/h
SDS-max
10.5kg
102.13dB(A)
105dB(A)
Main handle: ah,Cheq :20.38 m/s
Auxiliary handle: ah,Cheq: 19.61 m/s
Ⅱ
2
2
k=1.5m/s
2
2
k=1.5m/s
Advertisement
Table of Contents
