Setting Up Mtcapw Ui For Devicehq; Setting Up A New Firmware File On Devicehq; Pushing A Firmware Update To All Devices; Pushing A Firmware Update To One Device - Multitech MultiConnect MTCAPW-L12G2 Admin Manual

a. Select Account info (to the right of the account email address) and click Edit.
b. Check Device API Enabled and click Update Account.
c. Click Generate new Device API Keys.
d. Write down and save "Device API Secret" and "Device API Auth Token", these two keys are required
during MTCAPW device setup.
Note:

Setting Up MTCAPW UI for DeviceHQ

MTCAPW must be running firmware version 4.03 or above for DeviceHQ support. If new firmware becomes
available, download firmware from the website and upgrade the device before proceeding.
https://www.multitech.com/models/92507151LF
1. In Basic Network, on the LAN Setup Screen: Enter and Define Site Name so it shows as Description in
DeviceHQ
2. In Basic Network, on the System Management Setup Screen: DeviceHQ access setup requires:
a. Check the Enable option.
b. Enter DeviceHQ account API secret and API Auth Token.
c. Click Save.
Wait for a few minutes. If MTCAPW has an active cellular internet connection, it automatically checks in and
registers with DeviceHQ. Log in to DeviceHQ and make sure the new MTCAPW device shows up on your account.

Setting Up a New Firmware File on DeviceHQ

This is performed after logging in to DeviceHQ.
1. Click Files and click the New Firmware button.
2. Select model = Unspecified.
3. Enter the name and version number of the firmware file.
4. Choose the firmware BIN file.
5. Click the Upload button.
6. Make sure MD5 checksum matches on the firmware BIN file.

Pushing a Firmware Update to All Devices

This is performed after logging in to DeviceHQ.
1. Check all the devices.
2. Click Tasks and select Upgrade Firmware.
3. Select the firmware file you want to push to the devices.
4. Click OK.
This schedules a new firmware push to all devices the next time they check in.

Pushing a Firmware Update to One Device

This is performed after logging in to DeviceHQ.
1. Click on the individual device to view more details.
2. Click Schedule, select Upgrade Firmware, and select the firmware file.
®
MultiConnect CBRS Wi-Fi AP MTCAPW-L12G2 Admin Guide
DO NOT lose these keys since there is no way to see them again.
SETTING UP AND ONBOARDING DEVICES
13